The file for WordPerfect contained on this disk is suitable for use with WordPerfect 6.x for Windows and DOS. The following instructions apply:

In order to install the updated Label Templates into your copy of WordPerfect, you should first establish where the Label files (.LAB) are located on your system. To do this, go into WordPerfect choose Layout/Labels (for versions later than 6.0a choose Format/Labels) and at the bottom of the window your `WP_WP_UK.LAB` label file location will be displayed. This is normally located in the C:\WPC20DOS\ directory but may differ depending on how your copy of WordPerfect was installed onto your system. If you cannot locate the appropriate directory, consult your System Administrator.

What you will do with the label file on this disk [Tower.lab] is to copy it from the disk to the directory determined above, usually C:\WPC20DOS. To do this type from the DOS prompt;

CD C:\WPC20DOS [Press Enter]
then
COPY A:\COREL\WORDPERF\TOWER.LAB C:\WPC20DOS [Press Enter]

N.B. This command will change if the location of your .LAB file is not the C:\WPC20DOS directory. Now load WordPerfect and choose Layout/Labels (for versions later than 6.0a choose Format/Labels). Now press the [Change] button next to the file path displayed at the bottom of the “Labels” window. You will then be at the “Label File” window. Here highlight the TOWER.LAB file and press [Select]. Then browse through the many new Tower products listed in your Labels section.

In order to install the Tower templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Double click on folders “Corel”, “Office7″, “WPwin”
3. Click on “System” folder
4. Click on “CD-ROM” (or your compact disk drive)

ON RIGHT WINDOW:

1. Double Click on “Corel”, and then “Wordperf” folder
2. Click on “Tower.lab” file

FROM TOOLBAR

1. Click on “Edit” then “Copy”

ON LEFT WINDOW

1. Click on “System” folder again

FROM TOOLBAR

1. Click on “Edit” then “Paste”

Once you have loaded WordPerfect 7, choose “format”, “labels”, “change” and select “Tower.lab”. Enjoy using your new Tower labels.

In order to install the Tower templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Double click on folders “Corel”, “Suite 8″
3. Click on “Program” folder
4. Click on “CD-ROM” (or your compact disk drive)

ON RIGHT WINDOW:

1. Double Click on “Corel”, and then “Wordperf” folder
2. Click on “Tower lab” file

FROM TOOLBAR

1. Click on “Edit” then “Copy”

ON LEFT WINDOW

1. Click on “program” folder again

FROM TOOLBAR

1. Click on “Edit” then “Paste”

Once you have loaded WordPerfect 8, choose “format”, “labels”, “change” and select “Tower lab”. Enjoy using your new Tower labels.

In order to install the Tower templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Double click on folders “Program Files”, “Corel”, “WordPerfect Office 2000″
3. Click on “Programs” folder
4. Click on “CD-ROM” (or your compact disk drive)

ON RIGHT WINDOW:

1. Double Click on “Corel”, and then “WordPerfect2000″ folder
2. Click on “Tower lab” file

FROM TOOLBAR

1. Click on “Edit” then “Copy”

ON LEFT WINDOW

1. Click on “program” folder again

FROM TOOLBAR

1. Click on “Edit” then “Paste”

Once you have loaded WordPerfect 2000, choose “format”, “labels”, “change” and select “Tower lab”. Enjoy using your new Tower labels.

In order to install the Tower templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Double click on folders “Program Files”, “Corel”, “WordPerfect Office 2002″
3. Click on “Programs” folder
4. Click on “CD-ROM” (or your compact disk drive)

ON RIGHT WINDOW:

1. Double Click on “Corel”, and then “WordPerfect2002″ folder
2. Click on “Tower lab” file

FROM TOOLBAR

1. Click on “Edit” then “Copy”

ON LEFT WINDOW

1. Click on “program” folder again

FROM TOOLBAR

1. Click on “Edit” then “Paste”

Once you have loaded WordPerfect 2002, choose “format”, “labels”, “change” and select “Tower lab”. Enjoy using your new Tower labels.

In order to install the Tower templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Double click on folders “Corel”, Graphics8″
3. Click on “Custom” folder
4. Click on “CD-ROM” (or your compact disk drive)

ON RIGHT WINDOW:

1. Double Click on “Corel”, “CorelDraw 8″ folder
2. Click on “User.tpl” file

FROM TOOLBAR

1. Click on “Edit” then “Copy”

ON LEFT WINDOW

1. Click on “Custom” folder again

FROM TOOLBAR

1. Click on “Edit” then “Paste”

Once you have loaded CorelDraw 8, close the opening box, Click on “Tools”, “Options”, “Documents”, “Page”, “Label”. Choose the “Label” option, and scroll down untill you find the “User Defined” folder, and use the CILdata templates to your heart’s content!!

In order to install the Tower STIKATAG templates onto your software, follow these easy steps.

1. Access the compact disk drive.
2. Open the MAC folder
3. Copy the “user” file to the, “Corel Graphics 8″, “Customizable Pieces”, “Labels” folder, located on the hard drive
4. Run CorelDraw 8
5. Click “File”, “Document Setup”, and “Label”
6. Select the “User Defined” folder
7. Choose the CIL reference code that corresponds with the Tower labels you have purchased.

Enjoy using your Tower A4 labels!

In order to install the Tower templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Double click on folders “Program files”, “Corel”, Graphics9″
3. Click on “Custom” folder
4. Click on “CD-ROM” (or your compact disk drive)

ON RIGHT WINDOW:

1. Double Click on “Corel”, “CorelDraw 9″ folder
2. Click on “User” file

FROM TOOLBAR

1. Click on “Edit” then “Copy”

ON LEFT WINDOW

1. Click on “Custom” folder again

FROM TOOLBAR

1. Click on “Edit” then “Paste”

Once you have loaded CorelDraw 9, close the opening box, Click on “Tools”, “Options”, “Documents”, “Page”, “Label”. Choose the “Label” option, and scroll down untill you find the “User Defined” folder, and use the A4 label templates to your heart’s content!!

Below are the instructions for the installation of CorelDRAW 10

In order to install the Tower templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Double click on folders “Program files”, “Corel”, “Graphics 10″
3. Click on “Custom” folder
4. Click on “CD-ROM” (or your compact disk drive)

ON RIGHT WINDOW:

1. Double Click on “Corel”, “CorelDraw 10″ folder
2. Click on “User” file

FROM TOOLBAR

1. Click on “Edit” then “Copy”

ON LEFT WINDOW

1. Click on “Custom” folder again

FROM TOOLBAR

1. Click on “Edit” then “Paste”

Once you have loaded CorelDraw 10, close the opening box. Click on “Tools”, Options”, “Documents”, “Page”, “Label”. Choose the “Label” option, and scroll down until you find the “User Defined” folder, and use the Inkjet-laser templates to your heart’s content!

Below are the instructions for the installation of CorelDRAW 11

In order to install the Tower templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Browse to the following folders depending on you operating system:
   Windows 95/98:
   C:\WINDOWS\Application Data\Corel\Graphics11\User Custom Data\user.tpl

   Windows 2000/XP:
   C:\Documents and Settings\\Application Data\Corel\Graphics11\User Custom Data\user.tpl

3. If the “User Custom Data” folder does not exist, then create the folder first
4. Click on “CD-ROM” (or your compact disk drive)

ON RIGHT WINDOW:

1. Double Click on “Corel”, “CorelDraw 11″ folder
2. Click on “User” file

FROM TOOLBAR

1. Click on “Edit” then “Copy”

ON LEFT WINDOW

1. Click on “Custom” folder again

FROM TOOLBAR

1. Click on “Edit” then “Paste”

Once you have loaded CorelDraw 11, close the opening box. Click on “Tools”, Options”, “Documents”, “Page”, “Label”. Choose the “Label” option, and scroll down until you find the “User Defined” folder, and use the Inkjet-laser templates to your heart’s content!

Below are the instructions for the installation of CorelDRAW 12

In order to install the Tower templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Browse to the following folders depending on you operating system:
   C:\Program Files\Corel\Corel Graphics 12\Programs\Data
3. Click on “CD-ROM” (or your compact disk drive)

ON RIGHT WINDOW:

1. Double Click on “Corel”, “CorelDraw 12″ folder
2. Click on “User” file

FROM TOOLBAR

1. Click on “Edit” then “Copy”

ON LEFT WINDOW

1. Click on “Data” folder again

FROM TOOLBAR

1. Click on “Edit” then “Paste”

Once you have loaded CorelDraw 12, close the opening box. Click on “Tools”, Options”, “Documents”, “Page”, “Label”. Choose the “Label” option, and scroll down until you find the “User Defined” folder, and use the Inkjet-laser templates to your heart’s content!

In order to install the Tower STIKATAG templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Double click on folders “Corel”, “PrintOffice”
3. Click on “Custom” folder
4. Click on “CD-ROM” (or your compact disk drive)

ON RIGHT WINDOW:

1. Double Click on “PrintOffice” folder
2. Click on “User.tpl” file

FROM TOOLBAR

1. Click on “Edit” then “Copy”

ON LEFT WINDOW

1. Click on “Custom” folder again

FROM TOOLBAR

1. Click on “Edit” then “Paste”

Once you have loaded COREL PrintOffice, Click “From Scratch”, “Labels and Business Cards”, “Next”. In the options box, scroll down untill you find the “User Defined” folder, and use the Inkjet-laser templates to your heart’s content!!

In order to simplify creating documents with the correct label sizes we have provided Word Templates that correspond to each of the Tower products. Follow the guidelines below to copy the Templates into the relevant directories (Folders).

To make use of the CILdata CIL-W226 CD label you will need to have Microsoft WordArt installed.

1. At the command [DOS] prompt (C:\) type:

CD\MSOFFICE\WINWORD\TEMPLATES [Press Enter]

**When you installed Microsoft Office you may have chosen to install it in a directory different from the one above. If this is the case, find out what the directory is called and replace “MSOFFICE” with the appropriate directory name when typing the command.**

1. Secondly copy the templates by typing the string below at the command prompt:

COPY A:\MICSOFT\MICROSOF\*.DOT

You can now run Microsoft Word 6 and use the new Tower Labels by clicking on “File” and “New” and selecting the appropriate label.

In order to print many identical labels on the same page, select the label you wish to duplicate. Click your right mouse button and select “Copy”. Select the label you wish to duplicate onto and click your right mouse button again, now selecting “Paste” continue in this manner until all the labels are where you want them.

In order to install the Tower STIKATAG templates onto your software, follow these easy steps from Windows:

1. Click on “Start”, “Programs”, “Windows Explorer”
2. Double click on folders “MSOffice”, “Templates” OR “Program Files”, “MSOffice”, “Templates”

From toolbar

1. Click “New” then “Folder”
2. In the flashing box, type, “Tower Labels”

From left window

1. Click on “CD-ROM” (or your compact disk drive)
2. Click on “Micsoft” and then “Microsoft”

From Toolbar

1. Click “Edit” and “Select All”
2. Click “Edit” and “Copy”

From left window

1. Click on the “Tower Labels” folder created earlier

From toolbar

1. Click “Edit” and then “Paste”

This will copy all of the Tower templates to your copy of MS Word 7. To use the templates, load MS Word, click on “File” and then “New”, and select the “Tower Labels” tab. Ensure the grid lines are showing by clicking on “Table” , “Show Gridlines”. In order to print many identical labels on the same page, select the label you wish to duplicate. Click your right mouse button and select “Copy”. Select the label you wish to duplicate onto and click your mouse button again, now selecting “Paste”. Continue in this manner until all the labels are where you want them. To make use of the CILdata CIL-W226 CD label you will need to have Microsoft WordArt installed.

Start Windows Explorer by clicking on “Start”, “Programs”, and “Windows Explorer.”

From Explorer click on “CD-ROM” (or your compact disk drive)
Double click on the “Micsoft” then “Office97″ folder.
Double click on “MSOffice97″ file
Your Inkjet-laser label templates are now loaded.

In Word, to select the appropriate label click on “Tools”, “Envelopes and Labels”, Choose the “Labels” tab, click on “Options”, and under “Label products” choose “Other”. Browse through the many Tower Labels.

Start Windows Explorer by clicking on “Start”, “Programs”, and “Windows Explorer.”

From Explorer click on “CD-ROM” (or your compact disk drive)
Double click on the “Micsoft” then “Office2000″ folder.
Double click on “MSOffice2000″ file
Your Inkjet-laser label templates are now loaded.

In Word, to select the appropriate label click on “Tools”, “Envelopes and Labels”, choose the “Labels” tab, click on “Options”, and under “Label products” choose “Other”. Browse through the many Tower Labels.

Start Windows Explorer by clicking on “Start”, “Programs”, and “Windows Explorer.”

From Explorer click on “CD-ROM” (or your compact disk drive)
Double click on the “Micsoft” then “OfficeXP” folder.
Double click on “MSOfficeXP” file
Your Inkjet-laser label templates are now loaded.

In Word, to select the appropriate label click on “Tools”, “Letters and Mailings”, “Envelopes and Labels”, choose the “Labels” tab, click on “Options”, and under “Label products” choose “Other”. Browse through the many Tower Labels.

Start Windows Explorer by clicking on “Start”, “Programs”, and “Windows Explorer.”

From Explorer click on “CD-ROM” (or your compact disk drive)
Double click on the “Micsoft” then “Office2003″ folder.
Double click on “MSOffice2003″ file
Your Inkjet-laser label templates are now loaded.

In Word, to select the appropriate label click on “Tools”, “Letters and Mailings”, “Envelopes and Labels”, choose the “Labels” tab, click on “Options”, and under “Label products” choose “Other”. Browse through the many Tower Labels.

Start Windows Explorer by clicking on “Start”, “Programs”, and “Windows Explorer.”
From Explorer click on “CD-ROM” (or your compact disk drive)
Double click on the “Lotus” folder.
Double click on “Lotus_tower” file
Your Inkjet-laser label templates are now loaded

1. Create a new folder called “Tower Label Templates”.
2. Store this folder in a Work Folder on your hard drive.
3. Copy the Freehand files into the “Tower Label Templates” folder.
4. Open the size label template you require.
5. Create your label design directly onto the Tower Label Template and save it as a new document.

PLEASE NOTE!

Should you find that the template is slightly out of alignment with the label, please shift your template horizontally or vertically on your page.